Post 1 made on Wednesday January 23, 2019 at 13:08 |
Ferrari328328 Lurking Member |
|
|
I have a Marantz sr5011 without a remote. I found what's seems to be a working device code (492) that does everything except for the OK button. That's the one in the middle of the directional buttons. I have a harmony where the OK button works fine and I have tried to get the MX-700 to learn the code but nothing works. If I do it for the OK button it says succeded and a little l is on the button but it's not working. I have tried a spare button, e.g Pre Channel button, and a device button but nothing takes. Any Ideas?
|
|
Post 2 made on Wednesday January 23, 2019 at 17:38 |
edmund Elite Member |
Joined: Posts: | April 2002 13,841 |
|
|
The Marantz is probably using rc5 code set, which suffers from toggle bit, it gives learning remotes fits. You only solution is preset code, I would erase the command from the OK key, try ALL codes looking for the OK command. Set up second device to try codes, if you find one that has the command, copy it and paste to the aud device you're using.
|
|
OP | Post 3 made on Thursday January 24, 2019 at 10:06 |
Ferrari328328 Lurking Member |
|
|
Thanks. It turned out that the MX-700 refused to learn any code yesterday but for some unknown reason, it leaned everything today! I erased the previously learned command and then it worked.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.