The following page was printed from RemoteCentral.com:
The following is an archive of information recorded for the DirecTV HR21-Pro Wiki entry. This version was created by Total Control Remotes on Thursday April 30, 2009 at 09:34. (Original Entry)
| | Brand: | DirecTV |
Device Type: | DSS Receiver |
Model/Series: | HR21-Pro |
Model Year: | 2007-2008 |
Information: | [Link: directv.com] |
Configurations: | Search the file area |
| | | | | | Dimensions: | Unknown - Rackmountable |
| | | | | | Notes: | The DTV PRO can record up to 100 hours of HD shows (and 400 hours of SD), has an optical HDMI to extend that capability hundreds of feet and an RS232 control. It's rack-mountable as well. |
| |
|
|
Input Options
| | Infrared: | Yes - Supports 3 codesets |
IR Input Jack: | Yes |
Radio Frequency: | Yes - 418 MHz, Other |
RS-232 (Serial): | Yes |
Network IP: | No |
Bluetooth: | No |
USB: | Yes |
DC Trigger: | No |
| | | Output Ports
| | IR Output Jack: | No |
RS-232 Output: | No |
DC Trigger: | No |
| |
| |
|
Discrete Codes
| |
Power: | Yes |
Inputs: | N/A |
Sound Modes: | N/A |
Picture Modes: | N/A |
Screen Modes: | No |
| |
| Delays/Timings
| | Power On: | 2.00 seconds |
Switch Inputs: | 0.30 seconds |
Inter-command: | 0.30 seconds |
| |
|
|
|
Important Codes & Commands |
Ir codes are same as other Directv model boxes, HR20,HR21,HR22.
RS-232 codes now work due to firmware updates.
RS-232 codes exist for each individual channel making channel macros easier, quicker and more reliable.
A special 'IR IN' plug can be obtained from OPPO for use with their players that will work when connected to the back of the unit to an extender or control processor.
|
|
|